[. . . ] - 101 - Note: The Dreambox DM 500 carries the CE-sign and fulfills all requirements form the EU. 1 Explanation front panel Smartcard Reader Insert your Dreamcrypt Smartcard with the golden chip facing down and forward into the Smartcard reader. 2 Standby LED The Standby LED lights up red if the Dreambox is in standby mode. 3 Remote Control (RC) Led The remote control LED lights up every time the Dreambox receives a signal from the remote control. [. . . ] Pressing the OK-Button will change the scan option of the selected satellite. The options “nothing” means that the satellite is not scanned for any transponders. 50 User Manual Dreambox DM 500 english Pressing the OK-Button will toggle between the available scan options. Setting the multisat scan option to “all” will scan for all available services no matter if they are free or encrypted. Pressing the OK-Button will toggle between the available scan options. Setting the multisat scan option to “only free” will scan for all available services that are not encrypted. Pressing the OK-Button will toggle between the available scan options. 51 User Manual Dreambox DM 500 english The menu for the first scanned satellite is depicted on the left. Once your Dreambox is done searching you will see this menu on the right. 52 User Manual Dreambox DM 500 english The System will now ask you, if you want to scan any other transponders. Manual transponder scan (DM 500-S) If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “Service Searching” and press the OK-Button. Navigate to the option “Manual Transponder Scan” and press the OK-Button. Enter the transponder frequency with the Numeric Keypad on your remote control. Use the Navigation-Buttons left and right to switch between horizontal and vertical polarization and to change the FEC. Edit a transponder (DM 500-S) If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option “Setup” and press the OK-Button to select. Navigate to the option “Service Searching” and press the OK-Button. Navigate to the option “Transponder Edit” and press the OK-Button. This menu will let you edit the satellite and transponder lists that are used for the service scan. New transponders and satellites are usually announced in the Internet or in magazines. [. . . ] However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. [. . . ]